Chertyozh Grindera

For underwater hunting, buyers are offeredset of guns. By design, they are very different. Kodi universaljnogo puljta mac 2008. The most common are harpoon modifications. However, traumatic models are also on the market, which have great muzzle energy.

May 20, 2016 - 4. Before assembling the beams, remove the bevel from the sharp edges. You can use a planer or coarse grinding belt (grain size 60 / 80). Krestiki noliki rankin and quot noliki, risunok chertyozh samolyot kachinskoe. Fast Green W.e Butterworth, Fixtures Turning Boring Grinding Tool Engineering.

If you are engaged in self-assembly of weaponsfor diving, it is more expedient to consider harpoon modifications. Materials for them can be used in a variety of ways. It should also be borne in mind that the slaughter power of homemade weapons depends on the parts used.

To independently assemble the model, you need to consider the most popular devices. Double-skid model With a double slider how to make the gun itself forunderwater hunting? Answering this question, the first thing to think about is the preparation of the pipe. Its length should be at least 12 cm, and the thickness - about 4.4 cm.

After its grinding, it is necessary to make a channel (the drawing of a rifle for spearfishing is shown below). It is cut out, as a rule, with a width of no more than 0.5 cm. All this is necessary to place the ramrod. After that, the slide is attached directly.

The piston for it must be selected wide. In order to fix the tube, you canuse hook. The clip in this case is suitable for wood. However, it is possible to paste an overlay on it. Then it is important to attach the sear to the gun. Only after this, it is possible to install a fighting spring. At least it should be 3.5 cm in diameter.

Winding for such models is rarely used. Lin with the trigger is installed last. Hawaiian weapons with metal shoes To make with metal blocks of Hawaiiana gun for underwater hunting with their own hands can be without problems. For this, it is standard to prepare a pipe about 12 cm long. Its edges can be easily grinded on any machine. After that, the pads are already stuffed. From the front, they should be installed at a distance of 2 cm from the edge.

In this case, they are attached to the posterior region 2 cm further. All this is necessary in order to fix the barrel on the cage. However, before this many experts advisecut the channel at the edge of the pipe. The whisper in the gun can only be installed after the lining. Then it is important to make the winding.

After that, the line in the gun will be held fairly tightly. The next step is the ramrod. The trigger can be used from any machine. Compensators in this case do not apply. Shotgun with two springs This type of make a gun for underwater huntingtheir own hands is quite difficult. In this situation, the clip needs to be wide. However, it is necessary to begin the work with a standard search for a pipe for the trunk.

After that, it is possible to connect the sear and the clip. Many experts also advise making a winding on the edge of the trunk. The overlays are used if desired. The battle springs must be attached directly to the axis. At the same time, they should not touch the line. After fixing the fighting springs, you can proceed to install the feeder.

In this case, the slide should be located near the cage. You can use winding for this. Some also prefer a latch, but you can consider the option with pads. Pneumatic model with safety catch Collect the pneumatic underwater gun with yourHands for hunting can only be done if there are parts from the machine at hand. First of all, the barrel is removed. In this case, the clip is attached from the bottom with an indent of about 4 cm. Next, you need to install the sear.

Compensators are not installed in all cases. In this situation, much depends on the type of fuse. The ramrod must be fixed at the base of the clip at the gun. The safety lock is mounted on the line side. It is necessary to look after the feeder. When changing the position, it should not touch the fuse ring.

Device with rectangular feeder The device of a gun for underwater hunting withThe rectangular feeder resembles a modification with a latch. First of all, it is necessary to select a pipe for the model.

The thickness of its minimum should be 10 cm. After this, it is necessary to proceed to the cutout of the tubule. The thickness of it should be at least 0.6 cm. Then there is the possibility to make an overlay.

The clip in this case is better to install after the sear. The fuse is used if desired. Further, to make a gun for underwater hunting with their own hands, a rather dense winding is done. All this is necessary so that the return is not great. The axis for weapons is most often selected steel type. Sheptalo can be used aluminum. Compensators for the model fit a variety.